Clean and disinfect

  • Wear protective equipment! Observe the work regulations.
    • Safety shoes: Protection class S1 (uvex 1 sport S1)
    • Breathing protection: Half mask 3M series 6000 with filter 6055 A2
    • Protective gloves: 4X42C + Type A (uvex protector chemical NK2725B)
    • Safety goggles: uvex skyguard NT
  • Use of disinfectants:
    • Use strictly according to the manufacturer’s instructions!
    • Wear protective equipment according to the manufacturer’s instructions!
  • Dispose of rinsing water in accordance with the local regulations, e.g. feed it into the sewer!
  1. Mixer removed.
  1. Ensure that the bare cable ends are packed in a watertight manner!
  2. Attach the lifting equipment to the attachment point.
  3. Lift the mixer approximately 30 cm (10 in) above the ground.
  4. Spray the mixer with clear water from top to bottom.
  5. Spray the propeller from all sides.
  6. Disinfect the mixer.
  7. Dispose of dirt residue on the ground, e.g. flush it into the sewer.
  8. Allow the mixer to dry.